Body Side Garnish Molding Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disable the SIR system. SIR Disabling and Enabling Remove the rear seat belt D ring cover and bolt from the rear seat belt height adjuster on the 2nd row right side seat belt. Rear Seat Retractor Side Belt Replacement (2nd Row - Right Side) .
1	Body Side Garnish Molding Procedure Pull the body side garnish molding toward the inside of the vehicle to disengage the integral retainers and to clear the rear seat belt assembly. When replacing the body side garnish molding, feed the seat belt through the panel. Ensure the seat belt webbing does not become trapped during installation. Enable the SIR System. SIR Disabling and Enabling

Callout

Component Name

Preliminary Procedures

Disable the SIR system. SIR Disabling and Enabling
Remove the rear seat belt D ring cover and bolt from the rear seat belt height adjuster on the 2nd row right side seat belt. Rear Seat Retractor Side Belt Replacement (2nd Row - Right Side) .

Body Side Garnish Molding

Procedure

Pull the body side garnish molding toward the inside of the vehicle to disengage the integral retainers and to clear the rear seat belt assembly.
When replacing the body side garnish molding, feed the seat belt through the panel.
Ensure the seat belt webbing does not become trapped during installation.
Enable the SIR System. SIR Disabling and Enabling