Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Component Fastener Tightening Caution .

NOTE:
With the CMP actuator properly positioned onto the camshaft, the CMP actuator solenoid valve can be threaded completely into the camshaft using light hand pressure. Tighten by hand until snug.

Camshaft Position Actuator Solenoid Valve (1) - Install NEW and tighten
1. First Pass: 65 N.m (48 lb ft)
2. Final Pass: 90 degrees - J 45059 Angle Meter.
Courtesy of GENERAL MOTORS COMPANY

J 42386-A Flywheel Holding Tool (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Camshaft Position Actuator Magnet (1) - Install - Camshaft Position Actuator Magnet Replacement
Starter - Install - Starter Replacement (LV1)