Camshaft Position Sensor Harness, Camshaft Position Sensor and Camshaft Actuator Magnet Removal
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Sensor Harness, Camshaft Position Sensor and Camshaft Actuator Magnet Removal
| Callout | Component Name |
|---|---|
| 1 | Camshaft Position Sensor Wiring Harness Connector Bolt [2x] |
| 2 | Camshaft Position Sensor Wire |
| 3 | Camshaft Position Sensor |
| 4 | Camshaft Position Sensor Seal Replacing Engine Gaskets
NOTE:
Discard seal, it is not reusable. |
| 5 | Camshaft Position Actuator Magnet Bolt [3x] |
| 6 | Camshaft Position Actuator Magnet |
| 7 | Camshaft Position Actuator Magnet Gasket
NOTE:
Discard gasket, it is not reusable. |