LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Hydraulic Brakes) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Front Brake Hose Fitting Gasket
Rear Brake Hose Fitting Gasket
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Bleeder Valve 12.5 N.m (111 lb in)
Brake Booster Nut 36 N.m (27 lb ft)
Brake Master Cylinder Nut 36 N.m (27 lb ft)
Brake Master Cylinder Reservoir Retainer 8 N.m (71 lb in)
Brake Pedal Bolt 33 N.m (24 lb ft)
Brake Pedal Push Rod Retainer Bolt 10 N.m (89 lb in)
Brake Pressure Modulator Valve Pipe Nut - Front 32 N.m (24 lb ft)
Brake Pressure Modulator Valve Pipe Nut - Rear 32 N.m (24 lb ft)
Front Brake Hose Bolt 10 N.m (89 lb in)
Front Brake Hose Fitting Bolt 44 N.m (32 lb ft)
Front Brake Pipe Fitting @ Front Brake Hose 25 N.m (18 lb ft)
Power Brake Booster Fluid Flow Alarm Switch Nut 1.3 N.m (11 lb in)
Rear Brake Hose Fitting Bolt 42 N.m (31 lb ft)
Rear Brake Pipe Fitting @ Rear Brake Hose 25 N.m (18 lb ft)