LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Hydraulic Brakes) >> Repair Instructions >> Power Brake Booster Fluid Flow Alarm Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4894106Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Fluid Flow Alarm Switch (1) @ Power Steering Pump Inlet Hose - Install

  2. GM4894351Courtesy of GENERAL MOTORS COMPANY

    Using the J 22610  (2)Install a NEW clamp and tighten.(1)[4x]

  3. GM4893987Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Electrical Connector - Install(3)

  4. Hex Nut - Install and tighten(2)1.3 N.m (11.5 lb in)
  5. Protective Cap - Install(1)
  6. Fill and bleed the power steering system. Power Steering System Bleeding