LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Hydraulic Brakes) >> Repair Instructions >> Brake Master Cylinder Reservoir Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the brake master cylinder reservoir seals with GM approved brake fluid from a clean, sealed, brake fluid container.
  2. GM4853614Courtesy of GENERAL MOTORS COMPANY

    Brake Master Cylinder Reservoir Seal(3) - Install NEW[2x]

  3. Brake Master Cylinder Reservoir(2) - Install
  4. CAUTION:

    Refer to Fastener Caution .

  5. Brake Master Cylinder Reservoir Retainer (1) - Install and tighten[2x]8 N.m (71 lb in)
  6. Electrical Connector @ Brake Fluid Level Indicator Switch - Connect
  7. Fill the brake master cylinder reservoir to the maximum-full level with GM approved brake fluid from a clean, sealed brake fluid container. Brake Master Cylinder Reservoir Filling .