Circuit/System Testing
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
When removing connectors inspect for damage or corrosion. Damage or corrosion in the following requires repair or replacement of the affected.
- ROS
- ROS wiring harness
- Verify the correct ROS part number has been installed
- If the wrong ROS part number was installed, replace with the correct ROS.
- Verify that DTC B1001 is not set in the ROS.
- If DTC is set, perform the Setup New ROS procedure. If DTC resets replace the ROS.