Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Take note of the wiring harness locations and measure the harness lead length prior to removing. Mark harness routing locations on new headliner prior to harness removal.
- Use fiber or plastic trim tool to assist in removing the wiring harness from the headliner, taking care not to damage the harness.
- Remove excess glue and material from the wiring harness and re-tape areas where the tape was removed or damaged.
NOTE:
Use a camera to take pictures and use a pencil to mark the new headliner.