LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Heating And Cooling System) >> Repair Instructions >> Water Pump Inlet Pipe Replacement (LWN) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4166316Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Install a NEW seal.

    Water Pump Inlet Pipe Seal(2) - Install

  2. Water Pump Inlet Pipe(3) - Install
  3. CAUTION:

    Refer to Fastener Caution .

  4. Water Pump Inlet Pipe Bolt(1) - Install and tighten25 N.m (18 lb ft)
  5. GM4609376Courtesy of GENERAL MOTORS COMPANY

    Engine Coolant Hose(2) - Connect[4x]

  6. Engine Coolant Hose Clamp(1) - Engage[4x] - Hose Clamp Replacement Guidelines - Spring Type 
  7. Air Conditioning Compressor Bracket - Install - Air Conditioning Compressor Bracket Replacement (LWN) , or Air Conditioning Compressor Bracket Replacement (L96, LC8) , or Air Conditioning Compressor Bracket Replacement (LV1)
  8. Fill the cooling system. Cooling System Draining and Filling (Static Fill LWN) , or Cooling System Draining and Filling (GE 47716 LWN) , or Cooling System Draining and Filling (Static LC8, LV1, L96) , or Cooling System Draining and Filling (GE47716 LC8, LV1, L96) 
  9. Start the engine and check for coolant leaks.