Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
When installing the gasket, ensure that the part number stamped on the gasket is facing away from the engine.
Oil Pan Cover Gasket(2) - Install a NEW gasket.
- Engine Oil Cooler Pipe(1) - Install
- CAUTION:
Refer to Fastener Caution .
Engine Oil Cooler Inlet Pipe Bolt(1) - Install and tighten[2x]12N.m (106 lb in)
Engine Oil Cooler Hose Bracket Nut(1) - Install and tighten22N.m (16 lb ft)
- Remove the supports and lower the vehicle. Lifting and Jacking the Vehicle
- Engine Oil Cooler Pipe @ Radiator - Install
Engine Oil Cooler Connector Retainer(2) - Install
- Engine Oil Cooler Fitting Cap(1) - Reposition
- Engine Oil Cooler Pipe @ Radiator - Install
Engine Oil Cooler Connector Retainer(2) - Install
- Engine Oil Cooler Fitting Cap(1) - Reposition
- Retainer(3) - Install
Transmission Fluid Cooler Inlet and Outlet Pipe(2) @ Radiator - Install - Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (M5U)
- Fill the engine oil to the proper level with NEW engine oil. Engine Oil and Oil Filter Replacement
- Install the air cleaner assembly. Air Cleaner Assembly Replacement