LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Heating And Cooling System) >> Repair Instructions >> Engine Coolant Air Bleed Pipe Replacement (L96, LC8) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4848967Courtesy of GENERAL MOTORS COMPANY

    Engine Coolant Air Bleed Pipe O-Ring(1) - Install a NEW O-ring seal.[2x]

  2. GM4848965Courtesy of GENERAL MOTORS COMPANY

    Engine Coolant Air Bleed Pipe(1) - Install

  3. GM4848936Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Engine Coolant Air Bleed Pipe Bolt(1) - Install and tighten[2x] 12 N.m (9 lb ft)

  4. GM4848568Courtesy of GENERAL MOTORS COMPANY

    Engine Coolant Air Bleed Hose(2) @ Engine Coolant Air Bleed Pipe(3) - Connect

  5. Engine Coolant Air Bleed Hose Clamp(1) @ Engine Coolant Air Bleed Pipe(3) - Engage - Hose Clamp Replacement Guidelines - Spring Type 
  6. Generator and Power Steering Pump Bracket - Install - Generator and Power Steering Pump Bracket Replacement (L96, LC8)