LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Vehicle Access System) >> Repair Instructions >> Front and Rear Side Door Outside Handle Rod Clip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2829645Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    It maybe necessary to remove the front or rear side door latch from some of the vehicles to access the rod clip, refer to the appropriate procedure in this sub-section.

    Using the appropriate tool, open the outside door handle rod clip (1) on the latch.

  2. GM2790591Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The clip for the outside door handle rod is designed for one use only, a new clip Must be installed to the door latch to retain the outside handle rod.

    NOTE:

    Use the appropriate tool to push in on the retaining tabs (1) located on each side of the old clip to remove.

    Remove the old outside door handle rod clip from the door latch.