Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
When replacing the old designed outside door handle rod clip with the new designed clip (1) the anti rotation tab (2) will need to be removed.
NOTE:When installing the outside door handle rod to latch in order to prevent outside handle lever pre-load, the outside handle shall be fully secured to the door prior to securing integral latch clip to outside handle release rod. Push upward at the bottom the rod clip.
Install the new outside door handle rod clip (1) to the latch.
- Verify the outside door handle will release the door latch.