LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Vehicle Access System) >> Diagnostic Information and Procedures >> Cargo Door Ajar Indicator Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: X1M13 Door Latch Assembly - Rear Cargo
  3. Test for infinite resistance between the test points: Signal terminal C & Ground terminal A - The switch is in the open position.
    • If less than infinite resistance 

      Replace the component: M13 Door Latch Assembly - Rear Cargo

    • Go to next step: If infinite resistance 
  4. Test for less than 3 ohms between the test points: Signal terminal C & Ground terminal A - The switch is in the closed position.
    • If 3 ohms or greater 

      Replace the component: M13 Door Latch Assembly - Rear Cargo

    • Go to next step: If less than 3 ohms 
  5. All OK.