Circuit/System Description
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Battery positive voltage is applied at all times to both the coil and switched sides of the PRK LAMP relay. The park lamps are controlled by the body control module (BCM) by inputs from park lamp switch. When the BCM receives a park lamps ON command, it grounds the park lamps relay control circuit in order to energize the PRK LAMP relay. With the relay energized, battery voltage is applied through switch side of the relay, both PARK fuses, and the park lamp supply voltage circuits to all park, tail, and marker lamps.