Circuit/System Description
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
The high beam headlamps can be controlled by two different inputs to the body control module (BCM), the dimmer switch and the flash to pass switch. When the BCM receives a high beam headlamps ON command, it grounds the headlamp high beam relay control circuit in order to energize the high beam PCB relay. With the relay energized, battery voltage is applied through switch side of the relay, both HI BEAM fuses, and the high beam supply voltage circuits to the high beam headlamps.