Bluetooth Pairing for Vehicles with Radio RPO: UF7
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Either reset the pin code on the radio to 0000, or go under Device Info on the radio and see what the pin code is (to enter it later on the MIT).
- Turn the BT discoverable ON in the radio Bluetooth settings.
- Press Pair Device on radio (DO NOT PRESS SEARCH BLUETOOTH DEVICES ON THE RADIO).
- Press the Pair button on the MIT.
- When the three LED lights begin flashing on the MIT, enter the pin code (either 0000 if you reset it to that or what the radio pin code was).
- MIT will then automatically connect with the radio and should show "MIT Connected" message.
Make test call and the audio streaming test.