Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Body Hinge Pillar Garnish Molding-Right Side (1) - Remove - Body Hinge Pillar Trim Panel Replacement
Disconnect the electrical connector.
- Reposition the front floor panel carpet as necessary.
- Release the radio antenna cable grommet. (1)
- Attach mechanics wire to the cable.
Radio Antenna (1) - Remove - Radio Antenna Replacement
Radio Antenna Bezel (1) - Remove
- Radio Antenna Base Bolt (2) - Remove [2x]
- Release the retainer. (3)
- Radio Antenna Cable (4) - Remove