Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Starter(2) - Install
- Starter Bolt(1) - Install and tighten[2x]58 N.m (43 lb ft)
Fuel Pump Fuel Feed Pipe Bracket (1) - Install
- Fuel Pump Fuel Feed Pipe Bracket Bolt (2) - Install and tighten22 N.m (16 lb ft)
Electrical Connector(1) - Connect
Battery Positive Cable(2) - Install
- Battery Positive Cable Nut(1) - Install and tighten12.5 N.m (111 lb in)
- Retainer(3) - Engage
Oil Level Indicator Tube(2) - Install - Oil Level Indicator Tube Replacement
- Lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Single Battery) Battery Negative Cable Disconnection and Connection (Dual Battery)
CAUTION:
Refer to Fastener Caution .