Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Generator Bracket(3) - Install

CAUTION:

Refer to Fastener Caution

Generator Bracket Bolt(2) - Install and tighten[2x]58 N.m (43 lb ft)
Generator Bracket Bolt(1) - Install and tighten[2x]58 N.m (43 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Drive Belt Idler Pulley- Left Side(2) - Install - Drive Belt Idler Pulley Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

Engine Oil Fill Tube Bracket (2) - Install
Engine Oil Fill Tube Bracket Bolt (1) - Install and tighten25 N.m (18 lb ft)
Engine Wiring Harness Bracket(4) - Install
Engine Wiring Harness Bracket Bolt(3) - Install and tighten10 N.m (89 lb in)
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Fan Rear Shroud (1) - Install - Engine Coolant Fan Rear Shroud Replacement (LWN)Engine Coolant Fan Rear Shroud Replacement (LV1)
Courtesy of GENERAL MOTORS COMPANY

Power Steering Fluid Reservoir Outlet Hose(1) - Install - Power Steering Fluid Reservoir Outlet Hose Replacement (With LWN)Power Steering Fluid Reservoir Outlet Hose Replacement (Without LWN)
Courtesy of GENERAL MOTORS COMPANY

Generator(3) - Install - Generator Replacement (LWN) Generator Replacement (L96, LC8) Generator Replacement (LV1 with K68) Generator Replacement (LV1 with KW5/KG4)