Component Testing
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The component's temperature should be 19 to 21°C (66 to 70°F) while testing.
- Ignition/Vehicle & All vehicle systems - Off
- Disconnect the electrical connector: G18 High Pressure Fuel Pump
- Test for 0. 34 to 0. 44 ohms between the test points: Control terminal 1 & Control terminal 2
- If not between 0. 34 and 0. 44 ohms
Replace the component: G18 High Pressure Fuel Pump
- Go to next step: If between 0. 34 and 0. 44 ohms
- If not between 0. 34 and 0. 44 ohms
- Test for infinite resistance between the test points: Each terminal of the component & The component's housing
- If less than infinite resistance
Replace the component: G18 High Pressure Fuel Pump
- Go to next step: If infinite resistance
- If less than infinite resistance
- All OK.