LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Controls And Fuel - 4.3L (LV1) - Diagnostic Information And Procedures (2 Of 2)) >> Diagnostic Information and Procedures >> Inspection/Maintenance Complete System Set Procedure >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: INSPECTION/MAINTENANCE DESCRIPTION AND OPERATION .

Several states require vehicles to pass the inspection/maintenance (I/M) emission inspection in order to renew the vehicle's license plate.

This procedure is to satisfy the enable criteria necessary to execute all of the Inspection/Maintenance (I/M) readiness diagnostics and complete the trips for those particular diagnostics. When all I/M monitored diagnostic tests are completed, the I/M system status parameters are set to Complete. Perform the Inspection/Maintenance Complete System Set Procedure if any I/M system status parameters are set to Incomplete.

scientia non olet · About LEMON Manuals