Torque Converter Removal and Holding Fixture Installation

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Torque Converter
2	Transmission Case NOTE: Rotate the transmission so that the converter housing is up and secure with locking pin. Allow any remaining transmission fluid to drain from the case extension. Special Tools DT-47605 Holding Fixture J-3289-20 Holding Fixture Base Assembly J-8763-B Holding Fixture Equivalent regional tools: Special Tools

Callout

Component Name

Torque Converter

Transmission Case

NOTE:

Rotate the transmission so that the converter housing is up and secure with locking pin.
Allow any remaining transmission fluid to drain from the case extension.

Special Tools

DT-47605 Holding Fixture
J-3289-20 Holding Fixture Base Assembly
J-8763-B Holding Fixture

Equivalent regional tools: Special Tools