LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Automatic Transmission - 6L90 (MYD) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Disassemble >> Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM1627573Courtesy of GENERAL MOTORS COMPANY
Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

Callout Component Name
1 Manual Shift Detent Bolt
2 Manual Shift Detent
3 Control Valve Lower Body Bolt
4 Automatic Transmission Manual Shift Shaft Position Switch

Procedure

  1. Release the connector lock, indicated by the arrow, then disconnect the connector.
  2. Remove the switch assembly.