LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Automatic Transmission - 6L90 (MYD) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Assemble >> Input and Output Speed Sensor Assembly Installation

Input and Output Speed Sensor Assembly Installation

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM3247892Courtesy of GENERAL MOTORS COMPANY
Input and Output Speed Sensor Assembly Installation

Callout Component Name
1 Automatic Transmission Input and Output Speed Sensor

Procedure

  1. Install the wiring harness clips and sensor mount as indicated by the arrows.
  2. Connect the wiring harness connector.
2 Automatic Transmission Input and Output Speed Sensor Bolt M6 x 20 [2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
12 N.m (106 lb in)