Circuit/System Description
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
| Circuit | Description |
|---|---|
| 5 V Reference | Regulated voltage supplied by the control module. |
| Signal | The control module input circuit has an internal resistance connected to ground. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| B22 Brake Pedal Position Sensor | The input voltage varies depending on the position of the sensor. |
| K20 Engine Control Module | The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |
The pedal assembly contains 2 potentiometer-type brake pedal position sensors. When the pedal is pressed, the voltage of one sensor goes up and the voltage of the other sensor goes down.