Circuit/System Verification
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Remove a sample of fuel from the bottom of the fuel tank and place in a clean, clear container.
- Place the sample on a level surface for 2 minutes.
- Verify the sample is clear and bright in color.
- If the sample appears cloudy, or contaminated with water, as indicated by a water layer at the bottom of the sample
Refer to Circuit/System Testing - Particulate Contaminants in Fuel.
- If alcohol contamination is suspected
Refer to Circuit/System Testing - Alcohol in Fuel Testing.
- Go to next step: If the sample remains clear and bright
- If the sample appears cloudy, or contaminated with water, as indicated by a water layer at the bottom of the sample
- All OK.