LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Engine Controls And Fuel - 6.0L (L96 LC8) - Diagnostic Information And Procedures (1 Of 2)) >> Diagnostic Information and Procedures >> DTC P0097, P0098, or P0099 >> Conditions for Setting the DTCs

Conditions for Setting the DTCs

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

P0097 

NOTE:

The scan tool display range is between -40 to +150° C (-40 to +302° F).

The ECM detects that the IAT sensor 2 signal is less than 13 Hz, colder than -60° C (-76° F), for greater than 4 s.

P0098 

The ECM detects that the IAT sensor 2 signal is greater than 390 Hz, warmer than 150° C (302° F), for greater than 4 s.

P0099 

The ECM detects that the IAT sensor 2 signal is intermittent or has abruptly changed for longer than 4 s.