X403 Rearview Camera Jumper Harness to Body Harness (CUTAWAY)
 Courtesy of GENERAL MOTORS COMPANY
|
 Courtesy of GENERAL MOTORS COMPANY
|
Connector Part Information
- Harness Type: Rearview Camera Jumper
- OEM Connector: 12047886
- Service Connector: Service by Harness
- Description: 8-Way F 150 Metri-Pack Series (BK)
|
Connector Part Information
- Harness Type: Body
- OEM Connector: 12045688
- Service Connector: 13584253
- Description: 8-Way M 150 Metri-Pack Series (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
Service Terminal |
Tray Name |
Core Crimp |
Insulation Crimp |
| I |
Not Required |
J-35616-14 (GN) |
No Tool Required |
Not Required |
Not Required |
Not Required |
Not Required |
| II |
Not Required |
J-35616-3 (GY) |
No Tool Required |
Not Required |
Not Required |
Not Required |
Not Required |
| Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
Function |
Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
| A |
0.5 |
YE/ |
7641 |
I |
- |
Frontview Camera 2 Signal [+] |
A |
0.35 |
D-BU |
7641 |
II |
- |
| B |
0.5 |
L-BU |
7642 |
I |
- |
Frontview Camera 2 Signal [-] |
B |
0.35 |
L-BU |
7642 |
II |
- |
| C - D |
- |
- |
- |
- |
- |
Not Occupied |
C - D |
- |
- |
- |
- |
- |
| E |
0.5 |
PK |
239 |
I |
- |
Run/Crank Ignition 1 Voltage 2 |
E |
0.5 |
PK |
239 |
II |
- |
| F |
0.5 |
L-GN/ |
24 |
I |
- |
Backup Lamp Control |
F |
0.5 |
L-GN/ |
24 |
II |
- |
| G |
0.5 |
BK/ |
351 |
I |
- |
Ground 3 |
G |
0.35 |
BK/WH |
351 |
II |
- |
| H |
0.5 |
BARE |
6799 |
I |
- |
Camera Shield Ground |
H |
0.35 |
BARE |
6799 |
II |
- |