Removal Procedure

WARNING:

WARNING:

Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the front tire and wheel assemblies. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
Courtesy of GENERAL MOTORS COMPANY

Brake Hose Fitting Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Do NOT reuse the brake hose fitting gaskets.

Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Remove and DISCARD [2x]
Cap the brake hose fitting to prevent brake fluid loss and contamination.
Courtesy of GENERAL MOTORS COMPANY

Brake Caliper Guide Pin Bolt (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Brake Caliper (1) - Remove