Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assemblies. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
Brake Caliper Guide Pin Bolt (1) - Remove [2x]
- CAUTION:
Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.
NOTE:Do NOT disconnect the hydraulic brake flexible hose from the caliper.
Remove the brake caliper and support with heavy mechanics wire. (1)
Brake Caliper Guide Pin Seal (1) - Remove and DISCARD [2x]
Brake Caliper Guide Pin Bushing (1) - Remove and DISCARD [2x]