Rear Door Trim Plate Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Rear Door Inside Handle Bezel Replacement
1	Rear Door Inside Handle Bezel Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 1.9 N.m (17 lb in)
2	Rear Door Trim Plate Procedure Using a flat-bladed plastic trim tool, partially remove the trim plate. { If equipped }Disconnect the electrical connector. Transfer parts as necessary.

Callout

Component Name

Rear Door Inside Handle Bezel Bolt [2x]

CAUTION:

Tighten
1.9 N.m (17 lb in)

Rear Door Trim Plate

Procedure