LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Rear Bumper Valance Panel Replacement

Rear Bumper Valance Panel Replacement

Fig 1: Rear Bumper Valance Panel Location
GM4859033Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Raise and support the vehicle. Lifting and Jacking the Vehicle .
1 Rear Bumper Valance Panel Bolt[4x]
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5N.m (22 lb in)
2 Rear Bumper Valance Panel
Procedure 

Preliminary Procedures

  1. Using a trim type tool, release the center upper retainer and remove.
  2. Lower the vehicle. Lifting and Jacking the Vehicle .
scientia non olet · About LEMON Manuals