In and Out Adjustment

Remove the sliding side door upper roller cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement .
Remove the sliding side door lower roller cover.
Courtesy of GENERAL MOTORS COMPANY

Loosen the bolts that retain the upper front roller to the bracket.
Courtesy of GENERAL MOTORS COMPANY

Loosen the bolts that retain the lower front roller to the bracket.
Adjust the door in or out until you obtain the desired position.
Courtesy of GENERAL MOTORS COMPANY

Tighten the bolts that retain the upper front roller to the bracket to 25 N.m (18 lb ft).
Courtesy of GENERAL MOTORS COMPANY

Tighten the bolts that retain the lower front roller to the bracket to 25 N.m (18 lb ft).
Install the sliding side door lower roller cover.
Install the sliding side door upper roller cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement .