LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Side Door Center Roller Bracket Replacement >> Removal Procedure

Removal Procedure

  1. GM334047Courtesy of GENERAL MOTORS COMPANY

    Remove the sliding door trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .

  2. Open the door partially and support the door.
  3. Remove the bolts (4) that retain the sliding side door center roller bracket (1) to the door.
  4. Remove the nuts (2) that retain the sliding side door center roller bracket (1) to the door.
  5. Slide the sliding side door center roller bracket (1) from the rear of the track.
  6. Remove the sliding side door center roller bracket (1) from the vehicle.
scientia non olet · About LEMON Manuals