LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Door Opening Weatherstrip Replacement >> Removal Procedure

Removal Procedure

  1. Remove the body rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  2. Remove the body side rear trim panel. Refer to , or Body Side Trim Panel Replacement - Right Side .
  3. Remove the rear corner trim panel. Refer to Body Rear Corner Trim Panel Replacement - Left Side , or Body Rear Corner Trim Panel Replacement - Right Side .
  4. Remove the rear floor trim plate. Refer to Rear Floor Trim Plate Replacement .
  5. Remove the back body opening garnish molding. Refer to Back Body Opening Garnish Molding Replacement .
  6. GM333961Courtesy of GENERAL MOTORS COMPANY

    Pull the rear door opening weatherstrip from the door opening pinch-weld flange. Use 3M Release Agent or the equivalent at the bottom ends of the rear door opening weatherstrip if needed.

scientia non olet · About LEMON Manuals