LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Bracket Replacement (Left Side) >> Removal Procedure

Removal Procedure

  1. GM4824073Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Driver Knee Bolster Brace Bolt(1) - Remove[2x]

  2. GM4824075Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster(1) - Remove

  3. Release the retainers.
  4. Pull the instrument panel knee bolster (1) up and back to release the outboard tab.
  5. GM4824130Courtesy of GENERAL MOTORS COMPANY

    Communication Interface Module Bracket Bolt(1) - Remove

  6. GM4824131Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Driver Knee Bolster Deflector Bracket Nut(1) - Remove[4x]

  7. GM4824132Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Bracket(1) - Remove

  8. Release the bracket (1) from the instrument panel cluster trim plate tabs and the module bracket retainer nut.
scientia non olet · About LEMON Manuals