Additional Warnings

The following warnings have an associated instrument panel cluster (IPC) indicator or driver information center (DIC) message:

• Battery Voltage Low Message - The chime producer activates the audible warning as requested by the body control module (BCM). The BCM sends a serial data message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.
• Cargo Open Door Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a medium rate and at a finite duration.
• Clean Exhaust Filter Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a medium rate and at a finite duration.
• Engine Overheated Stop Engine Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.
• Engine Power Is Reduced Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a medium rate and at a continuous duration.
• Fuel Level Low Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.
• Oil Pressure Indicator - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.
• Tire Pressure Low Indicator - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.
• Turn Signal Indicators - The chime producer activates the audible warning as requested by the IPC. The chime produces two different chimes, one when the turn signal turns off and another when the turn signal turns on.
• Vehicle Dynamics Caution Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.
• Vehicle Overspeed Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a medium rate and at a finite duration.
• Transmission Hot Idle Engine Message - The chime producer activates the audible warning as requested by the BCM. The BCM sends a serial data message to the chime producer indicating the chime frequency of a fast rate and at a continuous duration.

Refer to Indicator/Warning Message Description and Operation .