Brake Pedal Assembly Replacement: Notes
The battery must be disconnected to prevent the brake master cylinder from pressurizing the hydraulic system during its automated self diagnostic tests that can possibly occur when a door is opened or the key transmitter is activated. Failure to follow this precaution may cause personal injury.
Refer to Brake Fluid Irritant Warning .
Minimize side motion and side loading of Brake Master Cylinder Pushrod to prevent bending the Brake Master Cylinder Pushrod. A bent Brake Master Cylinder Pushrod will require a NEW Brake Master Cylinder be installed.
Extreme care must be taken when removing and installing the Brake Master Cylinder. If the Brake Master Cylinder Pushrod is bent during the removal or Installation it will require a NEW Brake Master Cylinder be installed.
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .