Single Use Fasteners and Components
- Brake Pedal Push Rod Retainer
- Brake Master Cylinder Bracket
WARNING:
The battery must be disconnected to prevent the brake master cylinder from pressurizing the hydraulic system during its automated self diagnostic tests that can possibly occur when a door is opened or the key transmitter is activated. Failure to follow this precaution may cause personal injury.
WARNING:
CAUTION:
Minimize side motion and side loading of Brake Master Cylinder Pushrod to prevent bending the Brake Master Cylinder Pushrod. A bent Brake Master Cylinder Pushrod will require a NEW Brake Master Cylinder be installed.
CAUTION:
Extreme care must be taken when removing and installing the Brake Master Cylinder. If the Brake Master Cylinder Pushrod is bent during the removal or Installation it will require a NEW Brake Master Cylinder be installed.