Windshield Wiper Transmission Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures NOTE: To prevent erroneous DTC's, disconnect the battery negative cable before disconnecting the windshield wiper motor electrical connector. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection Windshield Wiper System Module Shield Replacement Disconnect the electrical connector.
1	Windshield Wiper Transmission Bolt [3x] CAUTION: Refer to Fastener Caution . NOTE: One windshield wiper transmission bolt is unique, maintain proper fastener location. Tighten 9 N.m (80 lb in)
2	Windshield Wiper Transmission Procedure Slide the windshield wiper transmission inboard to release the grommet from the plenum. Remove the windshield wiper transmission from the vehicle. Transfer components as necessary. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection

Callout

Component Name

Preliminary Procedures

NOTE:

To prevent erroneous DTC's, disconnect the battery negative cable before disconnecting the windshield wiper motor electrical connector.

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Windshield Wiper System Module Shield Replacement
Disconnect the electrical connector.

Windshield Wiper Transmission Bolt [3x]

CAUTION:

NOTE:

One windshield wiper transmission bolt is unique, maintain proper fastener location.

Tighten
9 N.m (80 lb in)

Windshield Wiper Transmission

Procedure

Slide the windshield wiper transmission inboard to release the grommet from the plenum.
Remove the windshield wiper transmission from the vehicle.
Transfer components as necessary.
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection