LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Propeller Shaft Transmission Flange Fluid Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the propeller shaft transmission flange. Propeller Shaft Transmission Flange Replacement 
  2. GM4539113Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not scrape or gouge the case extension housing while removing the output shaft seal.

    Use the J-6125-B  Slide Hammer and J-36825  Output Shaft Seal Remover to remove and DISCARD the propeller shaft transmission seal (1) from the case extension housing.

scientia non olet · About LEMON Manuals