LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Manual Shift Shaft Seal Replacement >> Installation Procedure

Installation Procedure

  1. GM4540983Courtesy of GENERAL MOTORS COMPANY

    Install the NEW manual shift shaft seal (1) using DT-47770  seal installer.

  2. GM4540962Courtesy of GENERAL MOTORS COMPANY

    Install the manual shift shaft aligning the position switch assembly (3) onto the shaft.

  3. Install the NEW manual shift shaft pin (1).
  4. Install the control valve body. Control Valve Body Replacement 
  5. Install the automatic transmission range selector lever. Automatic Transmission Range Selector Lever Cable Replacement 
scientia non olet · About LEMON Manuals