LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Manual Shift Shaft Replacement >> Removal Procedure

Removal Procedure

  1. Remove the automatic transmission range selector lever cable from the transmission. Automatic Transmission Range Selector Lever Cable Replacement 
  2. Remove the control valve body. Control Valve Body Replacement 
  3. GM4540962Courtesy of GENERAL MOTORS COMPANY

    Remove and DISCARD the manual shift shaft pin (1).

  4. GM4540965Courtesy of GENERAL MOTORS COMPANY

    Remove the manual shift shaft (1).

scientia non olet · About LEMON Manuals