LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Bracket Replacement

Automatic Transmission Range Selector Lever Cable Bracket Replacement

GM4535123Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Apply the park brake.
  2. Shift the transmission into neutral.
  3. Lifting and Jacking the Vehicle (Base) , or Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible) .
  4. Automatic Transmission Range Selector Lever Cable Replacement .
1 Transmission Range Selector Cable Bracket Bolt [2x]
CAUTION:

Refer to Fastener Caution .


Tighten 
22 N.m (16 lb ft)
2 Transmission Range Selector Cable Bracket
scientia non olet · About LEMON Manuals