LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Fluid Pressure Test Hole Plug Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Base) , or Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible) .
  2. Fig 1: Identifying Automatic Transmission Fluid Pressure Test Hole Plug
    GM4537425Courtesy of GENERAL MOTORS COMPANY

    Clean the surrounding area of the automatic transmission fluid pressure test hole plug.

  3. Remove the automatic transmission fluid pressure test hole plug (1).
scientia non olet · About LEMON Manuals