LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L60 (Mi1), 10L80 (Mi2) Or 10L90 (Mi4) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Fluid Pressure Test Hole Plug Replacement >> Installation Procedure

Installation Procedure

  1. Fig 1: Identifying Automatic Transmission Fluid Pressure Test Hole Plug
    GM4537425Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

    Install the automatic transmission fluid pressure test hole plug (1) and tighten to 11 N.m (97 lb in).

  2. Check the transmission fluid level (fill if necessary). Transmission Fluid Level and Condition Check .
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals