LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Water Pump Installation >> Water Pump Pulley Installation

Water Pump Pulley Installation

WARNING: This page is about a different variant/trim than selected.
GM5131527Courtesy of GENERAL MOTORS COMPANY
Water Pump Pulley Installation

Callout Component Name
1 Water Pump Pulley

Procedure

  1. Install the EN-46104  Water Pump Pulley Holding Tool onto the water pump pulley mounting holes.
  2. Remove the water pump pulley bolts.
  3. Remove the EN-46104  Water Pump Pulley Holding Tool from the water pump pulley.

Special Tool 
EN-46104  Water Pump Pulley Holding Tool
Equivalent regional tools: Special Tools
2 Water Pump Pulley Bolt [4x]
Tighten 
10 N.m (89 lb in)
scientia non olet · About LEMON Manuals