LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Positive Crankcase Ventilation Oil Separator Installation

Positive Crankcase Ventilation Oil Separator Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Positive Crankcase Ventilation Oil Separator Components With Tightening Sequence
GM4044979Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Positive Crankcase Ventilation Oil Separator Seal

Procedure

  1. Clean the sealing surfaces.
  2. Install a NEW seal. Do NOT reuse the old seal.
2 Positive Crankcase Ventilation Oil Separator Seal

Procedure

  1. Clean the sealing surfaces.
  2. Install a NEW seal. Do NOT reuse the old seal.
3 Positive Crankcase Ventilation Oil Separator
NOTE:

These components have tamper-proof connections and cannot be disassembled.

4 Positive Crankcase Ventilation Oil Separator Bolt [7x]
CAUTION:

Refer to Fastener Caution .


Tighten in sequence 
10 N.m (89 lb in)