LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Oil Pan Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  2. Remove any old thread sealant, gasket material or sealant using EN-28410  remover.
  3. Clean the oil pan and oil pan components in solvent.
  4. Clean out debris from the bolt holes.
  5. WARNING:

    Refer to Safety Glasses Warning .

  6. Dry the oil pan and oil pan components with compressed air.